| |
HAB-3
Hot Air Bending Machine
with Wide Top Clamp and Table-top Scale and Side
Clamps (No liquid! No mess!) |
|
| |
|
|
| |
technical
features |
|
| |
● For efficient bending of PVC (vinyl) profiles.
● Provides continuous, single piece bending
with side legs.
● Clean system with hot air to soften the
vinyl profiles.
● Can make single piece arch, roundtops,
segmented roundtops or any special form curves
with narrow and wide diameters.
● Adjustable temperature control (standard
temperature is 135 degrees Centigrade or 275 degrees
F but can be increased or decreased as needed).
● Easy to use. |
|
| |
|
|
| |
standard
equipment |
|
| |
● Heating tank.
● Work table with clear surface with diameter
scale under.
● Wide top clamp.
● Side clamping elements.
● Table side pneumatic clamps to press the
mould.
● Template1 (60-80 cm) for bending roundtops
with legs.
● Template2 (80-120 cm) for bending roundtops
with legs.
● Template3 (120-160 cm) for bending roundtops
with legs.
● Template4 (2500 cm) for bending large
arches without legs.
● Radius adjusting scale.
● Scale supports.
● Safety & instruction manual. |
|
| |
|
|
| |
optional
equipment |
|
| |
● Bending moulds.
● Graduated undertable scale for easy curve/diameter
setup.
● Top clamp for easy holding.
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
| |
|
Technical Data
|
American Units
|
Metric Units
|
|
Operating voltage
|
220 V or 440 V
Three Phase
|
220 V or 440 V
Three Phase
|
|
Frequency
|
60 Hz
|
60 Hz
|
|
Total power
|
20 Hp
|
15 kW
|
|
Current
|
70 or 35 Amp
|
70 or 35 Amp
|
|
Heating tank dimensions
|
134 x 28 x 36 inch
|
3400 x 700 x 900(h) mm
|
|
Work table dimensions
|
110 x 71x 36 inch
|
2800 x 1800 x 900(h) mm
|
|
Machine height
|
36 inch
|
900 mm
|
|
Work table weight
|
1067 lb
|
485 kg
|
|
Heater tank weight
|
836 inch
|
380 kg
|
|
Max. Profile height*
|
4.3 inch
|
110 mm
|
|
Max. Profile width
|
3.35 inch
|
85 mm
|
|
Max. Profile length*
|
236 inch/20 feet
|
6000 mm
|
|
Max. Roundtop bending diameter
|
63 inch
|
1600 mm
|
|
Min.
Roundtop bending diameter
|
24
inch
|
600
mm
|
|
Max. Arch bending diameter
|
98.4 inch / 8.2 feet
|
2500 mm
|
|
|
|
